FLUKE 805ES EXTERNAL VIBRATION SENSOR

The Fluke 805ES External Vibration Sensor is an ideal accessory for situations where using the onboard sensor tip of the Fluke 805 Vibration Meter is challenging or impractical. It allows maintenance professionals to take accurate vibration measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in areas where applying sufficient manual pressure to the vibration meter is difficult. The 805ES connects directly to the 805 Vibration Meter via an SMB connector located at the heel of the meter.
fluke.com
Key Features:
Specifications:
The Fluke 805ES External Vibration Sensor is an ideal accessory for situations where using the onboard sensor tip of the Fluke 805 Vibration Meter is challenging or impractical. It allows maintenance professionals to take accurate vibration measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in areas where applying sufficient manual pressure to the vibration meter is difficult. The 805ES connects directly to the 805 Vibration Meter via an SMB connector located at the heel of the meter.
fluke.com
Key Features:
Specifications:

• Low-Profile 90-Degree Sensor Body:Allows the sensor to access tight spots.
• Rugged, Coiled Cable:Minimizes dangling while stretching to more than 7 feet when needed.
• Powerful “U”-Shaped Magnet Mount:Creates a firm connection to flat or curved measurement surfaces.
• Rugged, Sealed Cable Connector with Strain Relief Tail:Reduces cable wear.
• Removable Sensor Magnet:Allows for direct attachment to a sensor mounting pad or threaded hole on equipment.

Specification | Details
———————–
Measurement Range | 7 g peak (68.7 m/s² peak)
Frequency Range | 0 to 6,000 cpm (0 to 100 Hz)
Operating Temperature Range | -13 to 140°F (-25 to 60°C)
Enclosure Rating | IP66
Size (W x H x D) | 4.35 x 3.30 x 4.35 in (110.5 x 83.8 x 110.5 mm)
Weight | 2.5 lb (1.134 kg)
Sensing Element | Magnet
Housing Material | Aluminum alloy
Electrical Connector | Screw terminals
Screw Terminal Wire Size | 24-14 AWG (0.2 – 2.5 mm²)
Cable Input | 3/4-14 NPT
Mounting Hole Size | 0.25 in (6.4 mm)
Sensing Geometry | Inertial element